660 Ltr Plastic Dustbin

The Outdoor Plastic Trash Bin body is made of high-density polyethylene injection molding, with a smooth surface and easy to clean. The barrel body performance requirements are produced according to the EN840-5 standard;

The inside of the Outdoor Large Plastic Recycling Trash Can is smooth, uniform, flawless and easy to clean; there is a leak hole at the bottom of the Outdoor Street Public Dustbin.

The body of Movable Plastic Dustbin With Lid is designed as an inverted trapezoid, narrow at the bottom and wide at the top, which can be stacked (up to 5 pieces per layer), which is convenient for transportation, storage and management, thereby reducing the cost of use

The edge of the Outdoor Plastic Waste Bin With Lid adopts the latest double skirt design, with honeycomb reinforcement ribs, which strengthens the mechanical strength of the barrel edge and also allows users to choose to install smart identity cards in the reserved position for electronic management, thereby improving the degree of management.

Seven reinforcing ribs are added to the front of the Recycling Bins Garbage Bins, and one enlarged and lengthened rib is added to each of the four corners of the barrel, so that the surrounding of the barrel can withstand sufficient mechanical strength and greater impact force; prevent the Green With Lid Plastic Waste Bin from being damaged during transportation and facilitate installation.

The lid of Move Plastic Rubbish Bins is made of high-density polyethylene material and is molded in one go. A handle is designed on the front and both sides of the Plastic Garbage Waste Bin. Two handles are set on the back of the Heavy Duty Plastic Garbage Cans. The handle surface is smooth and the width is moderate. The handle design of the Plastic Wheeled Dustbins is sufficient for operators to easily grasp even when wearing gloves.

There are 4 universal wheels at the bottom of the Outdoor Large Plastic Waste Bin, of which the 2 universal wheels installed on the front of the barrel body are equipped with brakes. Even when parked on steep slopes or uneven ground, the Plastic Outdoor Garbage Box With Wheel can be placed stably.The outer wheel of Plastic Outdoor Garbage Bin With Wheels is made of rubber, and the inner wheel frame is made of polyethylene. The outer wheel is made of pure rubber, which reduces the noise generated during movement and makes it move more smoothly.

The trailer handle of Plastic Waste Garbage Bin is a one-time injection molding of copolymer PP raw materials, and it is fixed to the barrel body by screws and nuts. The setting of the trailer handle is more labor-saving and not easy to break and fall off, making the trailer more convenient and also improving the service life of the entire barrel body.

The water leakage design at the bottom of the Large Plastic Trash Dustbin is not easy to accumulate water and is easy to clean. The leak plug is a one-time injection molding of copolymer PP raw materials. It is high-strength, durable, and can be reused for more than a million times.

The pin connecting the lid and the barrel body is a one-time injection molding long pin of copolymer PP material. It is high-strength, durable, easy to install, and has a barb anti-theft feature to increase stability. The Wheeled Waste Dustbin and the lid are tightly connected and will not fall off. It can be opened and closed repeatedly for more than a million times.