A plastic turnover box is a kind of turnover box, and it is also an important website product. So for this product, in addition to the previous products, what else do we need to learn and understand?
1. What is the main difference between PP and PE plastic turnover boxes?
The difference between PP and PE plastic turnover boxes is mainly low-temperature brittleness. The former is easy to fracture at low temperature, while the latter has better toughness at low temperature. , not easily broken. Therefore, everyone should take care to avoid making mistakes. In addition, the correct selection can be made according to the different properties of the two raw materials.
2. How to test the impact resistance of the PP plastic turnover box?
For and PP plastic turnover box, if you want to test the influence of resistance, in general, it is to carry out the impact resistance test of the turnover box to see if it will break when its behavior affects, so as to get specific data, and then judge whether the performance is good or bad.
3. What are the material requirements of the plastic turnover box hollow board turnover box? Can the plastic turnover box be used in the 100-layer purification workshop?
The hollow plate turnover box in the plastic turnover box has different requirements for different types of plate materials. For example, if it is a black hollow board material, then the surface is required to be smooth and bright. ; If it is colored or transparent, the gloss is required to be uniform, and there should be no spots or pits. In the class 100 purification workshop, plastic turnover boxes can be used, but they must be cleaned frequently.
