1. Plastic pallet static load test inspection
Place the pallet on a horizontal surface and place the goods on the pallet steadily. In this state, continue for 24 hours to check whether the pallet performance indicators are normal.
2. Load detection
Cooperate with mechanical equipment, such as the application of electric forklifts, to fork up the commodity pallets loaded on the truck. Within a certain period of time, the pallets are used normally without cracks, deformation, breakage, etc.
3. Plastic pallet load detection
According to the different products of the pallet, the load capacity is measured according to the standard, and the delay time is 6 hours to see whether the deformation of the pallet after the test meets the requirements, and whether there are cracks and deformations.
4. Corner drop test
It can perform corner test, drop 3 times at any place, accurately measure whether its linear elastic coefficient is within the specification range, and check whether there are cracks and deformations that damage the application after the tray is dropped.
